Banner
Home > News Center > Content
Post-maintenance work of ring winding machine
- 2020-06-03-

Ring winding machineFor long-term use, what are the steps for its maintenance?

1. Make good use of all adjustable parts:

The adjustment of adjustable components such as the winding tension, screen voltage, and the starting position of the wire rack is an easy and simple but effective method in maintenance. By adjusting the adjustable parts, some innocuous faults can be corrected. For example, if a certain company repairs a winding machine that has been used for many years, the system display screen is dim, and it is normal after adjusting the screen power supply voltage.


2. Spare parts replacement method:

In the maintenance of the ring-shaped rubber coating machine, replace the suspected faulty parts with good spare parts. After the maintenance personnel have basically judged the cause of the fault, this method can be used to quickly diagnose the fault range, and the winding machine can be quickly put into normal operation, and then the damage The parts are returned for repair, which is a common troubleshooting method.


3. Law to improve environmental quality:

For some very strange faults, if you can't find the cause by the elimination and replacement method, you often need to start with the surrounding environment. The environment is generally divided into two types, power and space. The power supply can be improved by using a regulated isolated power supply to improve the fluctuations from the power supply. For some high-frequency interference from the power supply, capacitor filtering can be used. These preventive measures can be used to reduce the faults caused by the power supply, increase and check whether the grounding is good. It is also very necessary. There are many reasons for space interference, such as dust, gas, etc., foundation floating, vibration, etc., space radiation interference, etc., etc., and it requires experienced maintenance technicians and professional equipment from automatic winding machine manufacturers to detect and maintain .


4. The whole machine reset method:

Under normal circumstances, the complete machine error caused by the instantaneous failure of the automatic winding machine can be cleared by hardware reset or switch system power in turn. If the working storage area of ​​the system is caused by unstable voltage, unplugging the circuit board or undervoltage of the rectifier switching power supply If the system is confused, the system must be initialized and cleared. Before clearing, you should make a backup record of the current data. If the fault cannot be eliminated after resetting and initializing, perform a hardware replacement diagnosis.


5. Compile the trial run program:

Compiling a reasonable program and running it successfully is the basis for determining the integrity of the whole machine system. Some winding parameter setting errors may cause system failures or invalid functions, sometimes due to user program errors caused by failures and shutdowns. You can use the preparation of a test run program to check and correct the errors of the user program to ensure normal operation.